1 x JBL MS9200 (pair) 6x9" 100W Waterproof Speakers
1 x JBL MA6002 2channel 160W Marine Amplifier
MS9200 Waterproof Speakers
The JBL MS9200 marine loudspeaker was designed specifically for marine applications. A waterproof motor structure, sealed cones, and integrated grilles ensure that these speakers will stay afloat for years.
Sealed magnet structure protects the motor structure from water. One-piece cast-polymer basket holds up, even after excessive exposure to sun and salt. Grille-mounted tweeter allows JBL to seal the front of the woofer cone, protecting the motor structure from sea spray and washdowns. Rubber surrounds outlast foam and offer superior cone-edge suspension. Stainless-steel mounting hardware included.
Power Handling, RMS: 100 Watts
Power Handling, Peak: 300 Watts RMS
Frequency Response (±3dB): 50Hz-21kHz Sensitivity: 91dB
Mounting Depth: 2-9/16"
MA6002 Marine Amplifier
The MA6002's high-output MOSFET power supply ensures optimum power delivery into numerous impedances with low distortion.
The MA6002 comes outfitted with a variable 12dB per octave electronic crossover allowing you to optimize system tuning based on speaker location and accompanying loudspeaker components.
Full range preamp outputs are provided facilitating multiple amplifier hookups without the need for high-loss Y-adapters or signal splitters.
• 60W RMS x 2 channels at 4 ohms and ²1% THD + N
• Signal-to-noise ratio: 84dBA (reference 1W into 4 ohms)
• 80W RMS x 2 channels at 2 ohms, 14.4V supply and ²1% THD + N
• 160W RMS x 1 channel at 4 ohms, 14.4V supply and ²1% THD + N
• Dynamic power: 160W at 2 ohms
• Effective damping factor: 6.395 at 4 ohms
• Frequency response: 10Hz – 27kHz (–3dB)
• Maximum input signal: 6V
• Maximum sensitivity: 100mV
• Output regulation: – 0.03dB at 4 ohms
• Dimensions (L x W x H): 9" x 10-1/4" x 2-3/16" (229mm x 261mm x 56mm)
Basket
Find a Dealer...